Power Splitter Cable

Power splitter cords are also called power splitter cables, sometimes called splitter power cables. It can divide a po=8iwer plug into multiple sockets or connectors, and then supply power to different devices simultaneously. It includes various types and lengths to meet your needs and has high-quality safety requirements, such as surge protection, overload protection and grounding.

You can use a power splitter cord in many situations, such as at home and office, and supply power for computers, monitors, printers, desk lamps and so on. You can also use a TV, game machine, audio system and streaming media equipment in your usual entertainment. If you are in the workshop and garage, you can also supply power for many tools and equipment to meet your needs. If you want to travel, buy a small power distributor cable, which is a very good choice for a hotel room with limited power outlets.

Our power distribution lines are made of high-quality materials, durable and safe, which can effectively prevent overload and short circuits and provide comprehensive protection for your equipment.

General distributor has 2 holes, 3 holes, or even more. Each jack can be connected to a device, but it can only reach a certain maximum load. Otherwise, it will increase the risk of fire. Usually, the capacity specification is printed on each extension line. This is usually around 3500 watts.

Generally, the desk lamp is 60W, the computer is 300W, the monitor is 100W, and the printer is 200W. However, computers and microwave ovens are high-power devices, so try to avoid connecting them to a distributor at the same time.

For specific equipment quantity and power limit, please refer to the product manual or information on the label of the distributor. And our products have detailed related instructions, welcome to check after purchase.

Yes, our power distributor is very safe, not only passing the safety standard certification but also our materials and insulation quality are reliable. However, when connecting the equipment you need, pay attention to the current rating of the purchased distributor. Overloading may lead to overheating or even fire, and try to use the distributor in a dry environment, otherwise, there may be the risk of electric shock. Beyond that, you need to ensure enough ventilation around the distributor to avoid overheating. Then, please ensure that all plugs are firmly connected when using. If they are loose, it may lead to sparks or short circuits, so avoid using them in series, which will increase the risk of overload and fire. Still, you need to regularly check whether it is worn after prolonged use. If a problem is found, it needs to be replaced immediately, and the distributor should not be placed under heavy furniture to avoid being squeezed.

Finally, it is best to avoid connecting high-power devices such as electric heaters, microwave ovens or air conditioners to the distributor. Doing the above things well can greatly reduce its hidden danger.

No. This is a very dangerous behaviour. Too long a cord will increase your risk of tripping. It will be hot and probably cause a fire on condition that it’s put together. If it happens to be in contact with metal, such as a desk leg, it will lead to the risk of electrification, and it will also cause overload, melting or burning of plugs and sockets. So for each socket, only one extension cord can be used.

If you want to use extension cord splitters more safely, it’s necessary to pay attention to some lists. First, check whether your extension cord has a fuse, which can ensure that it will automatically turn off when overloaded. Secondly, it is best to use rubber protective strips as insulators, so that when you cover it with carpet, you can reduce hidden dangers such as overheating. Third, don’t knot or wind your extension cable, which will lead to overheating of the cable. Fourth, please unplug it first instead of the power cord. Fifth, if you use it frequently, you’d better follow more sockets.

No, Many families like to tie cables together, which is simple and convenient, but it also leads to certain security risks, especially since the bundled cables passing through the holes of building materials may reach a certain degree of high temperature and bear heavy current load. Even these holes are not wrapped with insulating materials, and sometimes the temperature will exceed the highest rated temperature, 194 degrees Fahrenheit. It’s even more dangerous if it’s on the switchboard.

Therefore, the potential dangers include fire caused by overheating, normal operation of electronic equipment nearby by electromagnetic interference, abrasion or damage of cable insulation layer, increased risk of electric shock or short circuit, and increased risk of tripping. Here are some safety suggestions. First, avoid over-binding, and try to avoid binding the power distribution cable too tightly to allow air circulation and help heat dissipation. Second, use proper binding tools and specially designed cable management tools, such as cable ties and hook and loop, instead of metal wires or other materials that may damage cables. Third,

Separate high-current cables. The power cord of high-power equipment should be wired separately as far as possible. Fourth, regularly check the bundled distribution cable.

DC splitter cables or called direct current splitter cables, are a type of electrical current that flows in one direction only. They are very general in renewable energy systems, power grids, and household and industrial electrical systems. It has an insulating layer, an insulating shielding layer, a metal sheath and an outer sheath. Make sure power transmission and insulation, but also in the electric field leakage, more heat and cold resistance.

Usually, it’s necessary to supply power to multiple cameras in the security camera system. What’s more, it can separate multiple power connections from a power adapter to supply power to multiple cameras respectively, thus simplifying wiring and power management. If you have a 125A power adapter and four 121A cameras, you can use a 4-way DC splitter cable to divide the output of the power adapter into four connections, and each connection is supplied to a camera.

If you want to use the LED strip and install the various light strips, DC splitter cable can distribute the power of one power adapter to multiple light strips, to make sure that each light strip can obtain a stable power supply. If you have a 12V 3A power adapter and three 12V 1A LED strips, you can use a 3-way DC splitter cable to divide the output of the power adapter into three connections, and each connection supplies an LED strip.

When LED strip is used, especially when multiple light strips need to be installed, DC splitter cable can distribute the power of one power adapter to multiple light strips, to make sure that each light strip can obtain stable power supply. If you have a 12V 3A power adapter and three 12V 1A LED strip. You can use a 3-way DC splitter cable to divide the output of the power adapter into three connections, and each connection supplies a LED strip. If you want to install some network devices including routers and switches, you can supply power for multiple devices at the same time. What’s more, it can be branched from one power adapter to supply multiple network devices when you use a DC splitter cable. When it is necessary to charge multiple portable devices at the same time, a DC splitter cable can be used to separate multiple charging connections from a power adapter, which is also convenient for charging multiple devices at the same time.