Home > DC Power Cable > Power Splitter Cable > DC 1 Female to 2 Male Power Splitter Cable

Previous slide
Next slide

DC 1 Female to 2 Male Power Splitter Cable

The DC 1 Female to 2 Male Power Splitter Cable is an essential accessory that shares power from one single DC source into two separate devices at the same time. At one end, it has a female connector for receiving power, either from a DC adapter or power supply; at the other end, it splits into two male connectors that can each connect to a device.

1 DC to 2 DC Splitter Cords Technical Description

Color

Black, White

Wire core material

Tinned Copper, Copper

American Wire Gauge

16, 18, 20, 22, 24AWG

Insulation Material

Silicone, PVC

Style

Female to male

Ways

2 ways

Maximum Temperature

-40 - 80℃

Voltage

3 - 24V

Length

30 -100CM

Certification

RoHS, CE

This kind of cord is highly applicable in a situation where there are many devices, like LED strips, and CCTV cameras, among other low voltage electronic devices that require power, yet there is availability of only one power source. The cable splits the connection in such a way that you can power both devices when need be without necessarily looking for more outlets or adapter pieces, and you would have simplified your setup with efficiency.
Generally speaking, it is safe to use a DC 1 Female to 2 Male Power Splitter Cable if taken with some precautions. The main thing is just not to surpass the total output capacity of your power adapter with the power consumption of two connected devices. That would probably cause overheating, and reduce efficiency. It is also important that the voltage requirement should be appropriate for the devices connected, to avoid malfunction. Good quality splitter cables normally have enough insulation and strong connectors to reduce short circuits or loss of power. A cable from a genuine supplier ensures reliability for continuous use and gives a guarantee for long performance, putting your mind at rest while operating several devices with it.
The first thing one must do in case his DC 1 Female to 2 Male Power Splitter Cable does not work is to check for all the connections if they are properly and securely connected. Make sure the power adapter is suitable and the voltage and current are matched. Also, check the cable as a whole, looking visually for signs of damage or broken connectors. Should the problem persist after checking those, the cable should be tested with another different power source or device. Contact us for support or replacement if further assistance is required.